Gorenje WA72145BK Technical Information Page 22

  • Download
  • Add to my manuals
  • Print
  • Page
    / 28
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 21
239839
22
Failure Possible cause Remedy
The machine does not work
(indicator LED’s are not
illuminated).
Machine is not powered. Check if:
power in the socket,
the fuse is OK,
plug is in the socket.
FAILURE 2
Washing program does not
start
At the beginning of the
washing program: on/off
LED is ashing
During washing: LEDs
periodically ash twice
Door is not properly closed. Push it towards the machine.
FAILURE 3
Water does not enter the
machine (after approx. 4
min the machine reports
failure - LEDs periodically
ash three times).
Disturbed water inlet.
Check if:
• the water tap is open,
• inlet pipe net lter is clean.
Push the START button.
Water is leaking from the
machine.
Filter is not tightly screwed in.
Inlet pipe is not tightly screwed
to the machine or to the water
faucet.
Outlet pipe fell to the oor.
Tighten the lter properly.
Tighten the inlet pipe.
Af x the outlet pipe to the drain.
The machine moves during
operation.
The machine is not properly
leveled.
Transport brackets are not
removed.
Level the machine with the
adjustable legs.
Remove transport brackets.
The machine vibrates
during the spin.
Unevenly distributed laundry,
especially with very small
quantities (for ex. only the
bathrobe).
This is normal, the machine will
reduce the RPM if vibrations are
too strong.
Wash larger quantity of laundry.
Excessive foaming during
washing.
Excessive measure of
detergent.
Use washing powder according to
the instructions by the producer
and according to the water
hardness and soiled laundry.
Use only detergents for machine
washing.
FAILURE 7
Water is poorly pumped
out or not at all (machine
reports failure - the LEDs
periodically ash seven
times).
Water outlet is clogged Check if:
• the lter is clean,
• outlet pipe is not jammed,
• the drain is clogged,
• outlet pipe is positioned higher
than 1m.
Push START again
Laundry is not properly
spun.
No failure is reported.
The machine switched on the
UKS* function. Because of bad
laundry balance, the machine
has automatically reduced spin
RPM.
The machine operates normally.
Wash large and small pieces of
laundry together.
Page view 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments