Gorenje WA72145BK Technical Information download pdf (Page 15)

239839

• By the user

Selecting PUMP STOP function

The program stops when it reaches the PUMP STOP

position

(if this additional function was previously selected); (washing

machine door is closed throughout the washing process). The

LED over the button (C) starts to ﬂ ash. Washing can be resumed

by pressing the START (F) button.

If the setting pump stop

was selected, the program stops

at the last rinsing cycle and the symbol for pump stop is

indicated on the display. The program can be completed by

pressing the START (F) button; in this case, the program will

ﬁ nish with a spinning cycle, as deﬁ ned by the program.

The program can also be changed by rotating the program

selector knob to “0” and choosing either spinning or only

pumping out the water between additional programs or cycles.

Manual cancellation

The program is cancelled if the program selector knob (A) is

rotated to position “0”. If there is water in the machine, select one

of the additional programs (pumping

, spinning ) to empty

the drum and complete the program.

PAUSE knob

By pressing the PAUSE knob (F) program may be suspended

at any time. After certain time you may open the door if there is

no water in the drum, otherwise this is not possible. Program is

continued by pressing the START knob (F).

• Failures

Program is suspended in case a failure occurs. Signal LED’s

are ﬂ ashing and sound signal is heard (see cf. Failures).

• Power failure

At electric cutout the program is interrupted, however, after the

power supply has been re-established, the program operation

automatically proceeds.

If a power failure occurs when the drum is still full of

water, be careful not to open the door before you pump

the water out.

InterruptionsInterruptions

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

No comments

Gorenje WA72145BK Technical Information Page 15