Gorenje W8543LB Technical Information download pdf (Page 15)

WATER INLET CONNECTION

432600

Insert the gasket with a filter net into

the straight inlet hose attachment

nut and screw the nut onto the water

tap (with some models, the gasket

with filter net is already fitted and any

additional fitting into the nut on the

straight attachment is not required).

AQUASTOP

TOTAL AQUA-

STOP

REGULAR

ATTACHMENT

To ensure correct operation of the appliance, water pressure

inlet must be between 0,05 and 0,8 MPa. Minimum water

pressure can be established by measuring the quantity of poured

out water. 3 litres of water must be poured out from completely

opened tap in 15 seconds.

If your model has connections for both hot and cold water, then

connect one hose to the cold water supply (blue wing nut or blue

mark on the hose) and the other one to the hot water supply (red

wing nut or red mark on the hose), as indicated on the back wall

of the appliance (letters C and H) (C - cold; H – hot).

Hot water (a mixture of hot and cold water) is added only on the

programs of 60° or more.

The inlet hose should be tightened manually, firmly enough to

prevent any leaks. After tightening the hose, check for any leaks.

Use of pliers, wrenches, or other similar tools is not allowed when

installing the hose, as these tools can damage the nut thread.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 47 48

No comments

Gorenje W8543LB Technical Information Page 15